- Connector type: Power Plug.
- Improves system performance and prolongs equipment life by providing a consistent level of optimal power.
- Level 4 Power Cleaning and Filtration eliminates common symptoms of contaminated power.
- Reduces cross-contamination between components.
- Designed to provide noise isolation between 5 isolated outlet banks.
- Voltage Regulation prevents equipment lock-ups due to power sags and keeps equipment from heating up.
Product Description
-------------------
Make sure you're getting the most out of your home theater
equipment with the MAX 5400-PM from Panamax. Voltage Regulation
Improve system performance and prolong equipment life by
providing a consistent level of optimal power to your equipment.
Improves Picture and Sound Quality Level 4+ power cleaning and
filtration eliminates common symptoms of contaminated power
(including loss of detail, pops, hisses, hums and visual
artifacts) and allows you`re a/V equipment to perform up to its
full capability. Monitors Incoming Line Voltage and Provides a
Visual Indication of Power Level Panamax's patent pending AVM
circuitry continuosly monitors the incoming power as displayed on
the digital voltmeter. In case of an undervoltage or an
overvoltage, a flashing lightning bolt will be displayed in red
in the voltmeter, and power to the connected equipment is
automatically turned off if either of these conditions is
detected. When voltage returns to a safe level, power to the
equipment is automatically reconnected. Reduces
Cross-Contamination Between Components The M5400-PM is designed
to provide noise isolation between 5 isolated outlet banks
(including 1 bank with 2 high current outlets) so that any noise
created by an A/V component cannot contaminate the power going to
equipment plugged into another outlet bank.
From the Manufacturer
---------------------
Level 4+ Power Cleaning and Linear Filtration eliminates common
symptoms of contaminated power (including loss of detail, pops,
hisses, hums and visual artifacts) and allows your A/V equipment
to perform up to its full capability. Panamax's patent pending
AVM circuitry continuously monitors the incoming power as
displayed on the digital voltmeter. In case of an undervoltage or
an overvoltage, a flashing lightning bolt will be displayed in
red in the voltmeter, and power to the connected equipment is
automatically turned off if either of these conditions is
detected. When voltage returns to a safe level, power to the
equipment is automatically reconnected.
The M5400-PM is designed to provide noise isolation between 5
isolated outlet banks including 2 high current outlets so that
any noise created by an A/V component can not contaminate the
power going to equipment plugged into another outlet bank.
-----------------------------------------------------------------
Improve Your Picture and Sound Quality While Protecting Your Home
Theater Investment
-----------------------------------------------------------------
All the features you need to keep your system running clean and
safeVoltage Regulation
Regulates the output voltage on Banks 1-4 to 120 VAC ± 5 VAC.
This is accomplished through two boost stages and one buck stage
of voltage regulation. In Boost Stage 1 the voltage is boosted in
the 109-119V range, while Boost Stage 2 boosts the voltage in the
100-109V range. The Buck Stage acts to reduce voltage in the
125-136V range. LiFT Technology EMI/RFI Noise Filtration : Your
audio/video components are constantly being bombarded by
electromagnetic interference (EMI) and radio frequency
interference (RFI) through their AC power source. This
contaminated power can affect audio/video equipment and will
degrade the overall performance of your entire system. Common
symptoms of contaminated power include loss of picture detail,
dull colors, pops, hisses, hums and visual artifacts.
Automatic Over and Under Voltage Protection (AVM)
Panamax's patent pending power monitoring circuitry constantly
monitors the AC line voltage for unsafe voltage conditions such
as momentary spikes or prolonged over-voltages and under-voltages
(brownouts). These unsafe conditions pose a very dangerous threat
to all electronic equipment within the home. If the MAX 5400-PM
senses an unsafe power condition, it will automatically
disconnect your equipment from the power to protect equipment
from damage.Once the voltage returns to a safe level, the
M5400-PM will automatically reconnect the power. When subjected
to a 6,000V (open circuit voltage) / 500A (short circuit current)
surge, the M5400-PM limits its voltage output to less than 330V
peak, UL's best rating. If the magnitude of the surge is greater
than the capacity of the surge protection components, the
M5400-PM's Protect or Disconnect Circuitry will disconnect your
equipment in order to protect it. The M5400-PM will need to be
repaired or replaced by Panamax if this occurs within the
product’s 3 year warranty.
Five Isolated Outlet Banks
The M5400-PM is designed to provide noise isolation between the
outlet banks so that any noise created by A/V components plugged
into the M5400-PM cannot contaminate the power going to equipment
plugged into the other outlet banks of the M5400-PM.
Sequential Startup/Shutdown
Complex audio/video systems may be susceptible to voltage
transients generated internally at start-up/shutdown if all of
the equipment is powered on or off at the same time. This can
cause speaker "thumps" which are not only annoying but can also
damage the speakers and/or trip product circuit breakers. The
M5400-PM is designed to eliminate these transients by providing a
"start-up" delay for the High-Current outlets and a "shutdown"
delay for the Switched Outlet Banks. This minimizes in-rush
current issues by allowing the components plugged into the
Switched Outlet Banks to power-up and stabilize before any
amplifiers and powered sub-woofers are turned on. This sequence
is reversed during shutdown. The amplifiers and powered
subwoofers turn off, their power supplies drain, and then the
equipment plugged into the Switched Outlet Banks are turned off.
USB Charger, LAN, and Gaming Ports
The M5400-PM features a front panel convenience charger for mp3
players, cell phones, video game controllers, and other small
electronics. (NOTE: Some devices may not be compatible with this
USB charger.) Add to this an easy-to-access LAN port pass-thru
from the rear panel to the front panel for online gaming and a
convenience outlet located on the front panel, perfect for gaming
systems and other electronics.
Find out more about the M5400
Voltage Sense Trigger
The M5400-PM voltage sense trigger input uses a standard 3.5mm
(1/8") mini-mono plug. This feature provides an ON/OFF trigger
for the M5400-PM using a Direct Current voltage signal. Many
components such as pre-amplifiers and receivers have a DC trigger
built in, and will transmit a constant power signal when turned
on and in use. The presence of this power signal will turn on the
M5400- PM's switched outlets. When the source component is turned
off, the voltage trigger signal is also turned off and the
M5400-PM's shutdown sequence is initiated. An AC Adapter of the
appropriate voltage plugged into a switched outlet may also be
used if a DC trigger is not built in.
Protection for Cable/Satellite/Antenna as Well as LAN and
Telephone Lines
Coaxial protection circuits achieve optimum signal quality from
our new coaxial protectors that have the smallest signal loss on
the market - less than 0.5 db of attenuation from 0 MHz to 2.2
GHz. Our upgraded coaxial protection has been specifically
designed to virtually eliminate signal loss. The clamping level
of 75V will meet the demands of both cable and satellite voltage
while minimizing exposure to damaging spikes and surges.
Digital video recorders and satellite TV receivers require a
telephone line connection for TV show scheduling and/or
Pay-Per-View services. The M5400-PM also provides surge
protection for this line. One pair of RJ-11 telephone jacks is
provided for this. The circuitry utilizes auto-resetting PTCRs
and solidstate SIDACtors for reliability and unsurpassed
protection. The clamping level of the M5400- PM's telephone
protector is 260 volts. This will allow typical ring voltage
(90-130VAC) and operating battery voltage (-48DC) to pass through
the circuit and still protect the modem in your satellite
receiver from damage.
Protection circuits for 10/100 baseT Ethernet lines. Incoming
LAN line MUST be plugged into the LINE jack. Patch cord to the
equipment MUST be plugged into the EQUIP jacks. 1 LAN jack goes
to the front panel output jack. 8 wire protection, 52V clamping.
The M5400 provides reliable power protection for mid-sized home
theater systems
------------------------
Technical Specifications
------------------------
AC Power* Line Voltage: 120V, 60Hz
* Total Current Capacity: 15 A
* UL1449 Suppression Rating: 330V
* Protection Modes: L-N, L-G, N-G
* Initial Clamping Level: 200V
* Energy Dissipation: 2125 Joules
* Peak Impulse Current: 72,000 Amps
* Catastrophic Surge Circuit: Yes
* Thermal Fusing: Yes
* Over-voltage shutoff: 142 VAC ± 8 VAC
* Under-voltage shutoff: 90 VAC ± 2 VAC
* EMI/RFI Noise Filtration for Banks 1 - 4: 80 db, 100 KHz - 2
MHz
* EMI/RFI Noise Filtration for Bank 5: 60 db, 100 KHz - 2 MHz
LAN and USB* LAN Circuit Clamping Level: 52V
* LAN Wires Protected: 8
* USB Power Delivery: 500 mA @ 5VDC
Telephone
* Fuseless/Auto-resetting: Yes
* Clamping Level: 260V
* Capacitance: 30pf (approx.)
* Suppression Modes: Metallic and Longitudinal
* Wires Protected: 2-Wire, Pins 4 and 5
Cable and Satellite
* HD 1080 i/p Ready: Yes
* Bi-directional: Yes
* Shielded: Yes
* Clamping Level: 75V
* Frequency Range: 0MHz - 2.2 GHz
* Insertion Loss: <0.5 dB
-----------------------------------------------------------------
The Panamax Family of Power Management Solutions for Home Theater
Applications
-----------------------------------------------------------------
Surge Protection & AVM Voltage Regulation Home Theater
Applications Linear Filtration Isolated Outlet Banks Total
Outlets How this benefits your home theater system: Protects
equipment against momentary spikes and prolonged over/under
voltages by disconnecting the power and reconnecting it when safe
power returns Improves system performance and extends equipment
life by providing a consistent level of optimal power to your
equipment Just a few examples of electronic equipment pieces that
need power management protection Improves Picture and Sound.
Provides concert-quality sound and theater quality video
Isolating outlet banks from one another prevents noise
contamination between components Each model offers a mix of
always-on, switched, and high-current outlets to meet the needs
of every system
M7500-PRO
( http://www..com/Panamax-M7500-PRO-11-Outlet-Power-Conditioner/dp/B000LTIK2U )
Included (The Ultimate)*
*with regulation Included 50” and above TV screen size, Media
Servers, Home Automation Systems, Audio/Video Receivers (AVR),
Amplifiers, DVD players, Video Game Consoles, Powered Speakers,
Subwoofers EMI/RFI Banks 1 - 4 100 db, 100 KHz – 2 MHz
Bank 5, (Hi Current) 60 db, 100 KHz – 2 MHz 7 11
M5400-PM
( http://www..com/Panamax-M5400-PM-11-Outlet-Theater-Conditioner/dp/B000SXWGAG )
Included (Best)*
*with regulation Included 50” and above TV screen size, Media
Servers, Home Automation Systems, Audio/Video Receivers (AVR),
Amplifiers, DVD players, Video Game Consoles, Powered Speakers,
Subwoofers EMI/RFI Banks 1-4: 80db, 100KHz, -2MHz
Bank 5 (Hi Current): 60db, 100KHz -2MHz 5 11
M5300-PM
( http://www..com/Panamax-M5300-PM-Theater-Power-Conditioner/dp/B000SXWGAQ )
Included (Best) Not included 50” and above TV screen size,
Receivers, Amplifiers, DVD players, Video Game Consoles, Powered
Speakers, Subwoofers EMI/RFI Banks 1-4: 80db, 100KHz, -2MHz
Bank 5 (Hi Current): 60db, 100KHz, -2MHz 5 11
M5100-PM
( http://www..com/Panamax-M5100-PM-Theater-Power-Conditioner/dp/B000SXZJKK )
Included (Better) Not included 19" and above TV screen size,
Receivers, DVD players, Video Game Consoles, Powered Speakers,
Subwoofers EMI/RFI Banks 1-2: 80db, 100KHz, -2MHz
Bank 3 (Hi Current): 60db, 100KHz, -2MHz 3 11
M4300-PM
( http://www..com/Panamax-M4300-PM-Theater-Power-Conditioner/dp/B000SXWGDI )
Included (Good) Not included 19" and above TV screen size,
Receivers, DVD players, Video Game Consoles, Powered Speakers,
Subwoofers EMI/RFI Bank 1: 60db, 100KHz, -2MHz
Bank 2 (Hi Current): 49db, 100KHz, -2MHz 2 9
-----------------
What's in the Box
-----------------
(1) M5400-PM Power Management Component (1) Coaxial cable, 36
inches (1) Telephone Cable, 48 inches (1) LAN cable (CAT-5), 48
inches (1) Rack kit