Altera MAX10 FPGA Development Board - MaxProLogic

The media could not be loaded. Very good board, worked as expected. plenty of I/O's very good for development.student and professional could use this board. you need a separate programmer which yo could get from the same seller at cheaper price. all in all very good product.

It works but, the switches do nothing and are not detectable as IO inputs.

The reason I bought this board was the flexibility of accessing the FPGA's IO pins. Due to my schedule, I did not get to play with it until a month after it was delivered. Hence, the return period is closed after 30 days. Here are the problems with the board.1) The GCLK1 (pin 26 of FPGA) is not 50MHz as advertised. It's only 2MHz as measured by a digital oscilloscope even with a simple pin to pin routing out of the GCLK1 for monitoring. See attached photo.2) Something is definitely wrong with the FPGA. I used a simple TFF to divide the GCLK1 by two. But it did not behave the way I expected. See attached photo.3) I read out the original POF file from the chip when it was delivered. I saved the original POF file and was able to reprogram the FPGA with the original POF back on the chip. It worked for a few times but it quit after that.Recommend to check out the board during the 30 days of return period. I guess the old adage "You get what you paid for" is definitely true in my case. I will think twice before buying this item again.

It works good, but, it has not a pin planner list

Everything is fine, delivery as announced

Easy to use with Windows10 laptop. Had problem with regulator overheating when using external supply (7.5V) and had to return the unit. New unit came quickly and works well with laptop USB supply.Documentation has some errors but it is not difficult to figure out. I only used the RAM based configuration so I am not sure how much can be saved permanently. However it is useful that it retains the original self test configuration after power up. Connectors are installed which is not shown in the picture on Amazon.

working as said, shipped fast ahead of schedule

I bought this board a couple of months ago, just to introduce myself to FPGA.Recently, I finally found the time to play with it and to blink LEDs.Though, the problems started right away. Quartus just failed to configure the device.After some time MOSFETs got fried and the board is done now.The end.