HOMELYLIFE 3 Pin 10mm LED Strip Connector Solderless 10 Pcs with 16.4ft Extension Cable 3 Conductor for Waterproof or Non-Waterproof WS2811 WS2812 WS2812B LED Strip Lights

Having soldered wires to my led strip, and suffering problems with them touching each other etc, and not being very sturdy, I thought I’d try these. They are really easy to install, and work well. I used wires that have connectors to the pins on the controller, so had a complete solder free installation. The connection is very strong and secure, alllowing the strip to be easily installed with no risk of disconnects or shorts.

It is very important when using, to ensure that the teeth that pierce the LED strip are aligned with the contacts in the strip. This may mean that the LED strip is not slotted all the way in to the connector. It all depends on how the cut of your LED strip has been made. If it does not work first time, it can be "re seated" a few times to get it right. I'm the end I managed to used 8 extensions of these on one strip.

i used this along with (https://www.amazon.co.uk/dp/B0DHP9CDSY?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1) led lights i had to remove both the waterproof layer and foam underside in order to get them to work the clips stab into the copper of the leds and if you get it wrong or mess up it will tear the copper atatchment on the led making it unusable i also had to strip about 1cm of the wire before inserting it into the clips inorder to get the current to flow as when unstriped the clip would not pierce the wire properly the clips are loose on what i have done and i needed to use electritions tape wraped around the ends to stop them from sliping out on some of the clips. if i knock the clips they can sometimes stop working making the coulour only go so far and you need to give the clip a knock or squeese to make it continue to work for the price includeing wire and 10 clips seems like a verry good price for the job i have done it seems to have worked aslong as its not disturbed or knocked the coulour consistency is good throught the full strip i orderd 2 of these the 1st 1 i had 0 issues with but the 2nd one i got was all bent and warped as in the photo and sections of the wire was unusable and had to be discarderd and some of the clips in the 2nd lot didnt work at all aswell 4/5 as in 1st batch was good 2nd wasnt but did the job

Works easily to connect led strips.

Put some lights on in my daughters room.. the functionality was excellent? Very easy to use. It was speed too extend her lights around her room. We were happy with this product.

Exactly as describe

These make light (ha ha) work of extending cables. Reliable, reusable and (so far) 100% effective. Highly recommend. I have used other types and can solder the strips together but would always use these if possible.

Only white would work for me. Not a good connection. Feels good but didn’t work

Muy sencillo de usar

Mein LED-Streifen knickte veim Verlegen derart ab, dass es hinterm Knick nicht mehr leuchtete. Um das ganze wieder zum Leben zu erwecken ohne den verklebten Streifen lösen zu müssen habe ich ein Segment herausgeschnitten und die beiden Streifen mit den Adaptern und dem Kabel verbinden können. Das hat sogar geklappt, obwohl mein LED-Streifen eine wasserabweisende Gummibeschichtung drüber hatte. Allerdings, und deshalb habe ich einen Stern abgewertet, ich musste erstmal an Streifenresten üben, wie das ganze praktisch angewendet wird, weil keinerlei Anleitung beilag und die Sache nicht 100% selbsterklärend ist. Wie rum muss der Streifen eingelegt werden, und wie weit. Am Ende habe ich die Stachel von unten in den Streifen eindrücken lassen und den Streifen selber etwas weiter eingeführt, als die Stachel vermuten lassen. Und es lässt sich gut manuell mit dem Daumen zusammendrücken - ohne Zange. Es lässt sich auch mit etwas Beherztheit wieder öffnen. Dabei ging nichts kaputt.

Einfach zu verwenden und hat bei jeder Anwendung direkt funktioniert.

The plastic connector piece works fine. But the wires provided are the worst possible quality. There just isn’t enough internal metal wiring underneath the external rubber sleeve. The voltages don’t transfer. Waste of money. Don’t buy.

Will never buy these bad clips again, every single one had bad connection and made me thought my led strip was broken or the control board... Very disappointed.