Weylon 56Pcs Car Auto Body Dent Removel Paintless Repair Tool Kits Slide Hammer Glue Gun Stickers

Description

Colour Name:56pcs How to use this paint less dent repair kits from Weylon? 1.Clean the dent with a clean wet cloth; 2. Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes; 3. Glue a Tab with hot melt glue: - Use Lifter or T-shaped repairer : Glue a Pulling Tab with hot melt glue on it's back by glue gun tool; - Use Bridge Puller: Glue the middle tab of Bridge Puller set with hot melt glue on it's back by glue gun tool; 4. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes; 5. Pull out tabs(24pcs): - Use Lifter: Screw the rotary axis of the Lifter to find a perfect range for the spring which can pull the tab out. Then press the handle to pull out the tabs directly; - Use Bridge Puller: Adjust the three screws' height to find a perfect place for the Bridge Puller, then pull out the tabs directly; 6. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen; 7. Clean the repaired place with a clean wet cloth.  Pack : 1pcs Bridge puller 24pcs Red tabs 1pcs 100W Glue Gun 1pcs Metal tap down with 9 heads 1 x Empty Spray Bottle(capacity : 30 ml) 2 x Yellow Glue Sticks 2 x Black Glue Sticks 2 x White Glue Sticks 1pcs Rubber hammer 2 pcs Plastic shovel 1pcs Gold dent lifter 1pcs Dishcloth 1 pcs Operation Manual Can be divided into three grades: 1:Transparent milky white is the viscosity of the weak effect can be used ordinary small bumps, please choice it first. 2:Yellow as neutral. 3:Black is the toughest viscosity. (Please use the transparent color and yellow, if not successful, then use the black sticker.)