Eureka Powerspeed Lightweight Vacuum Belts 2 Pack Replaces OEM #E0205 Bundled with Use and Care Guide

The Eureka Powerspeed Lightweight Vacuum Belts come in a package containing 2 belts. This package does not include any sort of directions, so let's hope you kept the user's manual. If you do have the manual, you can see the directions for replacing the belt. Otherwise, the procedure is not difficult, just confusing without directions. I am attaching a picture of the bottom of the vacuum where I have highlighted in red the screws you will need to remove. NOTE! I highly recommend creating a map of the screws and where they go. As there are 3 different sizes of screws, having a map of the bottom of the vacuum, and which size screw goes in which hole, will help you a lot. Now, once you have removed the indicated screws, you can remove the bottom plate that protects the belt and axles. The front roller brush slides out to accommodate replacing the belt. Once you have removed the roller brush, do yourself a big favor and clean the brush while it is disassembled. Just takes a few minutes, you will thank yourself later for this. Now, put the belt on the roller brush and reinstall the roller brush back in its slots (At points 3 and 4 on the picture.) At this point the belt should be in position at point #1. Now you will need to call upon all your super hero strength to pull the belt back to point #2 and slip it over the grey bar. Once this is done, go ahead and reinstall the protective plate using the map I told you to make for the screws. Go ahead and give it a try, you should be good to go now.

ok

Good

Delivered earlier than expected! Secure packaging, exact fit. Very pleased

Great belts!! Installed easily (did not need directions, pretty simple to see and understand if you are mechanically inclined in the slightest). I have used the vacuum several times since installing them and it works like a champ.

Buying belts for the eureka powerspeed vacuum is a hassle. I bought some replacement belts that were too small from another company (lanmu). These belts came in a matter of days and I compared the replacement belts from lanmu with this belt and the lanmu belt was smaller. The lanmu belts are too small and broke within a matter of weeks. I also ordered from manufacturer and after a few weeks, I am still waiting. EO205 belt was the original belt and it lasted a couple years.

It's good to have replacement parts I hope I don't need it but I've it

Fast shipping, belt fits great and so far works great. Couldn't find in stores. Thanks