InvisibleShield Glass Elite Google Pixel 8 Pro Screen Protector - 5X Stronger with Reinforced Edges, Scratch & Smudge-Resistant Surface, Easy to Install

This is the second time I've purchased this screen protector because it actually works! My metal water bottle fell on my phone and while the screen protector cracked, my screen didn't. Easy choice to reorder and replace my old protector. Super easy installation!

I had a lot of recommendations for this cover. Total failure. I put it on 13 days ago and it already cracked, and I had not dropped it.

Zagg's warranty replacement is good, however when I have the whole family using ZAGG screen protectors, the inability to merge two orders into one, and instead being required to pay for shipping for each replacement warranty screen protector if the screen protector started lifting off the screen again or if a crack has appeared is a burden. I've opted to just use another screen protector's UV liquid and UV cure light to fill in the gap that appears months later on the top of the phone screen, let the resin seep into the sides of the screen protector and nudge the resin until the bubbles are gone, then cure. Otherwise, the convenience of the lifetime warranty replacements is great. The screen protector fits great, has no bubbles when I use my method for installing them, humid room, or even in a bathroom after a hot shower or running the shower for a few seconds to have the air be humid to avoid dust in the air getting between the protector and the phone. Adhesive quality can be slightly questionable, but it does at least last up to 8-14 months as for my prior phones with the ZAGG glass screen protectors. Could just be heavy use that the adhesive fades away or lifts off from the screen corners, but the trick of UV resin/liquid to fill that gap to not have an obnoxious bubble anymore is a great fix from the many times I've cracked the screen protector and used the ZAGG warranty replacement. It's just the cost and urgency that you want that replacement screen protector shipped as you'd have to pay for the shipping yourself.

I have used ZAGG screen protectors for a while. With each phone model I get, they keep getting easier and easier to install dust and bubble free. This one was no exception. With the fingerprint reader in the middle of the screen, many protectors tend to cause malfunctions--even others that were Google-approved like this one is. The ZAGG, however, has been able to read fingerprints that were programmed prior to installing it, like it was a bare screen. I haven't come across any others that do this. When I read about so many people having problems with speed of fingerprint reading, it was a non-issue for me and my family--we had ZAGG. Since they have a lifetime warrantee, replacement screens are available for low cost. With other brands, unless you have an iPhone, they have already moved on to other phone models so screen protectors that fit my older phone are as scarce as hen's teeth! I typically get 2 years out of a ZAGG, 5 months non-ZAGG. Yes, the price is initially high, but the quality is unmatched.

The install kit included makes applying the screen protector very quick and easy. My only real comment is I wish it was a little bigger to cover the edges near the case.

I wanted to find a screen protector for my new Pixel 8 that wouldn't mess up the fingerprint sensor, so went with this one. So far so good! Fingerprint sensor works just fine with it on; I haven't even needed to turn on the setting to make the phone extra-sensitive for screen protectors. Application was super easy. Being an idiot, I installed it upside-down with the camera cut-out at the bottom, but I was able to peel it up carefully and reapply it correctly without an issue. Even after having to put it on twice, it went on smooth as butter both times with no real issue. It didn't come with any kind of cloth or card to smooth out bubbles, but to be fair, there weren't hardly any -- far less than prior past screen protectors, and I just wrapped a screen cleaning cloth in some index cards to push out the few that were there after it attached. I don't really like the cut-out for the camera -- it catches the light oddly and doesn't look quite as nice as it otherwise would there was no cut-out -- but it's probably that way for good reason, and I'll probably get used to it. That is my only very minor quibble with this whole thing.

This protector is cut perfectly for the pixel 8 screen. Very easy to install. Although there were some bubbles at first, I used credit card with a soft cloth around it to squeegee out the bubbles. Would have liked to have seen the install kit come with something to press the air bubbles out, like other installation kits. Fingerprint sensor works great with the screen protector as well. I didn't have to change the settings to screen protector mode in the phone settings. Great buy!!! Will update if anything changes. Update ---- Screen cracked in two places on the first minor drop inside the house. Same quality as a $10 to $15 screen protector. Wouldn't buy again. I'm dropping two stars because of the high price and low durability.

TL;DR - The Screen Protector came with little adhesive for it to stick to my phone as it was always following my movements when clearing bubbles. Plus no squeegee. I was looking forward to this because the phone was definitely not cheap. It didn't even come with a squeegee, tf. I placed my phone on the alignment tray which I liked since it came with 2 prongs (top and bottom) to help align the screen protector. Used the cleaning pad, dried it with the cloth, used the sticker to pick up fine particles. So far so good. Instructions said to peel off the first tab, which I did and in doing so it slightly peeled off the other tab around the edges in which it was covering the whole other side of "Tab 1". No biggie. Now, where "Tab 1" was is the face down (the side that's going to stick to the phone) and the opposite side is the other tab covering the entirety of that face up side. I place the Screen Protector [SC] down on my phone with the alignment tray. Perfectly aligned!!! Instruction video said to press down from left to right that way the middle of the SC would stick and from that middle point to press upwards and downwards to completely stick. It barely stuck to my phone when I tried the left to right movement. I pressed harder and it just followed my movement. I cleaned my phone some more and tried again and it just wouldn't stick enough. It just barely stuck to my phone. I had it aligned again and this time I left it alone for about 10 minutes to see if maybe that would work. It had some bubbles this time so I thought it did work. As I went to clear the SC of all bubbles the SC was somewhat firmly stuck to my Phone because it slightly moved with my movements. I had one cloth on one end to hold while the other would clear the bubbles and the SC only moved on the side where I was moving to clear the bubbles. With my index finger and thumb I touch both sides of the SC and there's barely any adhesive or whatever on the face down side that was supposed to stick to my phone. This SC came with little adhesive for it to work and it infuriated me.

I watched a youtube tutorial and read the instructions, it was pretty straight forward. Clean, wipe, use dust sticker, and installed the screen protector with the alignment plastic they provided. It was rather straightforward, no issues. No dust or bubbles stayed, just gently press/push them out. One tip I would have liked to know is when you are carefully moving the peeled screen protector down onto your phone screen, I'd recommend you first hold it with both hands, then hover it just above the screen, then anchor both of your pinky finger knuckles securely on the table first, as this helped my shaky hands become less shaky, as the screen protector is slowly lowered onto your phone screen. From there, it was easy peasy. I don't mind that that the edges do not curve like the other brands, as my phone case would wrap around the edges anyway.

La parte de abajo de la pantalla no funciona correctamente, se partió por la mitad en la primera semana. Una lástima que un producto tan caro no funcione.

Easy to fit using the guide frame. Incredibly clear & easy to clean. Installed on my Pixel 8a following two drops, with a broken screen each time. Expensive to replace. Phone now protected by the ZAGG glass elite & an OTTERBOX case.

Yet another crappy screen protector. Not only does it not stick to the screen at the corners, especially the bottom corners, but it's also not quite the right size. It seems to be a bit longer than the screen but a bit narrower. I think the fact that it's longer is why the bottom corners don't stick. While the fact that it's narrower makes it look like the screen is scratched all along the side edge.

Well worth the money