32cm height [transparent case series] figure case width 27cm x 27cm x depth (japan import)

Description

It is possible to charm more beautiful, to guard (Figure Hobby) important collection from dust and scratches. Type of height and width of the case because it abundantly, cases of optimal size that was in the collection you have you will find always. Pedestal other than because it is transparent colorless plastic material of the case is a collection of classic case that is easy decoration. Easy assembly. Complete just fit into the groove parts of three (base and side plate, top plate)! I snap the side plate (1) pedestal. It is completion by inserting the top plate (2) side plate. The height of the actual inside dimension is reduced by about 1cm Because it is self-contained. Display size is the outside dimensions of the side plate. It is not in the dimensions, including the top plate and pedestal. The height of the inside dimension is about minus 1cm because there about 1cm depth of the groove in the base. (Depth of the groove is slightly different depending on the size.) , Thickness of the side plate will be inside dimension value obtained by subtracting the depth and width of about 0.4mm. Please note that because it is folding, machining of parts, it will be of value in general and bent the side plate. Processing for folding has been part of the corner. Side plate is has been created by vinyl chloride sheet. I think the top plate and pedestal will overlap if the same size, but one that does not place a heavy much good the thickness of the side plates is because it is 0.4mm. I do not do the calculation and verification of load-bearing. I can put away by folding when not in use. When not in use can accommodate folded as shown in the photograph. Thickness is approximately 3cm when I fold it. Will be delivered in a collapsed state shown in the picture at the time of delivery.