UP Fila Premium ABS 3D Printer Filament, Low Odor, Consistent 1.75mm Diameter,1KG (500g×2 Spools), Red

I've been 3D printing for at least the past 5 years and have tested out various filaments including varieties of PLA, ABS, Wood, Metal, PVA, etc. I found ABS one of the more difficult filaments to use until I stumbled on to this particular brand. When I found it on Amazon I was hesitant at first because of my previously failed attempts with ABS but I thought I'd give it a try.Unboxing this filament almost reminded me of unboxing an Apple product. The packaging was very well made and the vacuum seal on the filament was perfect, very professional.I also like that the filament comes in 2 500g spools instead of 1 large 1kg spool because you can leave the other spool in its air tight seal until you are ready to use it.At first I wasn't very impressed because the filament didn't seem to extrude properly and it definitely didn't stick to my print bed. I had my extruder temp set at 230 degrees and my bed temp at 70 degrees. I was using a glue stick to help the material adhere to the platform but nothing seemed to work. I then decided to see if maybe the extrusion temperatures for this filament are different and found out that is exactly what the biggest issue was. The filament was designed to be extruded between 260 and 270 degrees and seems to like a bed temperature of about 100 to 110 degrees which may vary depending on the nozzle size of your extruder, your platform material and various other things such as ambient room temperature.With the new settings the filament printed perfectly. It didn't lift up on the corners and it seemed to extrude at a very consistent thickness. I've attached some pictures, you'll notice that there's some webbing going on but that's because I still need to fine tune my retract settings and may need to dial the temperature on the extruder back a little more.From the resources I could find online, it seems that the filament was designed to be used with their UP printer and I'm assuming that you'd most likely get the best quality from it by using it with their equipment, I may just need to try that out in the future.Overall, this will definitely be my go to ABS filament from now on.

I just open up my package and instead of getting Crystal Sea, I received Natural. I marked three stars because of the inconvenience of not getting the correct color. Granted, I could order it again but that will not fix my time strain situation concerning colored. This makes me concerned when I order Blue and Treetop Green. Overall, the OEM product that came with my printer seems to work very well. I'll provide updates later.

El material presenta un problema en la impresión. Realizo la misma impresión, con el mismo equipo, con la misma configuración, con un filamento de la misma referencia pero diferente color y funciona. Apenas hago el cambio de carrete por el filamento de este proveedor y no funciona!

Ordered Red got White same as another review. Box is clearly marked as red ABS with white ABS inside. I own two Tiertime 3d printers and i only buy their filament first time this has happened

Great clean prints! I’ve tried many other 3rd party filaments and nothing compares to the quality on my Up! Box + 3D printer

This is very high quality ABS. I have used several other quality abs filaments and this filament produces the best results. The photos were printed with this filament and smoothed with acetone vapor. This is by far the best ABS filament. High consistency, great for acetone vapor smoothing.

Filament of high quality, consistent diameter and material purity. The matte finish is very nice and easy to paint, not as smelly as other ABS during printing. The overall material performance is excellent, good tensile strength with a small amount of flexibility.

Once the fillament is printed, the green seems to be more a mint color. Keep that in mind. Otherwise it is great.