Dream Lighting 12V Trailer Side Marker Light LED 4x1.3 inch Oblong Red/Amber LED Clearance Marker Lights Recessed Mount RV Camper Trucks - 6 Amber & 6 Red

Couldn't find surface mount lights anywhere locally. Needed to replace the marker lights on my 1974 Winnebago Brave, the lights had completely deteriorated in the elements. To make these fit, I had to drill the back plate and route the ground wire back inside the enclosure to attach to the mounting screw. I used stainless steel screws on the ground side just for extra protection, just in case this thing is on the road for another 45 years. Lights are nice and bright and seem well constructed. Shipping was kind of expensive, but small vendors usually can't do much about that.

Only decent set of 2.5" NON-RESESSED lights I could find without spending an outrageous amount of cash. However the caps are extremely shallow, had to swap screws because the heads of our screws wouldn't allow the cap to close up.Also ease note the BLACK wire is LIVE and not ground. The WHITE wire is ground. Whoever decided to do this has clearly never wired 12v applications or automobiles/RVs/boats before... You should never have the black wire as hot, that should always be ground. There was no instrucy showing the wiring diagram, and only because I'm careful and checked resistance on the wires to the solder joints did I found this out.Wiring it the normal way can cause damage and a possible FIRE. Absolutely bad design.