Brake Caliper Covers Set of 4 Compatible with for Tesla model 3 Accessories.2017-2023 18/19 inch Wheel Hub Brake Caliper Covers -Fit Tesla Model 3 Green Brake Caliper (Fluorescent green)

Great product. Easy install if you have a good understanding of car maintenance. It looks great on my 2026 model 3 but you need to understand what rear calipers you have. Many 26 models have the older rear calipers and you need to order the 2017-2023 covers.

I found this to be a high quality and complete kit. The faux brake lines, bleeder nipples with real rubber caps, and Allen bolts all look realistic. The paint was attractive and well applied. The brackets are well designed and easy to install, although my own 8mm box wrench worked better than the included one. I read some earlier reviews about the brackets needing to be reworked, but these brackets were clearly designed for a Model 3 non-performance, and they clipped exactly where they needed to on the stock calipers. I used some Locktite Red to further secure the bolts. After installation, there was about 1 cm clearance between the caliper cover and my stick-on wheel balancing weights on my Tesla 18" aero wheels (without their covers), and plenty of room to the spokes, so no fitment worries axially or radially. The included Tesla decals look great; my wife applied them and I painted over them with VHT sp730 gloss clear brake caliper paint to protect them. All in all, we got the look we wanted for a third the cost of painting the calipers, and installation took about 90 minutes, including jacking the car and dismounting and mounting the wheels, instead of the full day it would have needed to be in a shop (where I am never sure that they'll do the jacking on a Tesla right).

Installed on a 2020 model 3 Tesla standard Plus. 18” wheels. Instructions- horrible. Not even instructions for the same covers. Having said that.... after installing, if you can’t figure out how to install as they literally take about 10 minutes per wheel.... including jacking up and removing wheel... then you’re probably the same person that calls a plumber out for a jammed sink garbage disposal and calls someone to replace the air filter on your house AC. It’s simple... However.... the final product is awesome. I DO want to mention that the clearance is nearly exact. Meaning the space between the rim and cover is millimeters. When installed PUSH as far BACK as you can before tightening to get max clearance. I actually had one of them rubbing and was making a horrendous noise. Was barely touching and damaged the one just lightly. I had to actually push part of the cover in and force it beyond its design... which separated part of it unfortunately. But the rubbing has quit. And you would not notice unless you knew it was forced inward. (By me) The overall aesthetics overall make up for it. They are designed VERY well and look very realistic. The only modification i can recommend would be to extend the front covers middle out so it completely covers the original caliper. It shows slightly. Overall very pleased.

First of all, these calipers were a pain to put on. The front ones would NOT line up with the holes for the center clamp and I could not get the screw in, even after an hour of trying every which way I could. I decided the other 2 screws were sufficient as the cover seemed to be on pretty tight without the center clamp. Second, and most importantly, I've had these on for about 2 months now without any issues. And yes, they look amazing, however (and a very big HOWEVER), as I was driving yesterday, I started hearing a rather loud rattle coming from the rear passenger wheel. I instantly knew it was the caliper cover. Not even a minute later, I heard it come off completely... WHILE I WAS DRIVING! I managed to pull over, and sure enough, the cover was literally just sitting at the bottom of the wheel. Keep in mind I didn't have a a jack, so I couldn't remove the wheel. Eventually, after an hour of trying everything I could, I managed to barely slip it out between the wheel spokes. Luckily, there was no seemingly serious damage done to the wheel or any of the components, but I started freaking out thinking any of the other ones could fall off at any minute. Luckily, I made it home safely, and removed the other 3. Bottom line, yes they look amazing, but I wouldn't risk causing serious damage to my car or myself!

The rear one are perfect fitment. The front ones needed some muscle but got it secured enough. Other than that, it’s just what it looks like and I like it.

These are a perfect fit and easy to install on my 2019 Tesla model 3. Went with the yellow covers on my red car. Calipers match my yellow emblems perfect.

Purchased the 4pc set yellow, and has made quite the statement. The instructions were spot on for the front calipers, however, the rear were absolutely incorrect. At first, the rear calipers appeared to be snug, but after a few days (and natural road bumps), they would become loose mid-commute and would begin irritating with the rim. The friction caused damage to the caliper covers and when I was in the process of removing them, the securing bolts completely flew off and were no longer there. I am thankful the dissembled parts didn't cause car damage or a tire blowout. By the end, I've kept the front covers on, but have removed the rear (obviously) until I decide what to do from here.

I have recently purchased the brake caliper covers from amazon after debating for some time that i should paint or use the covers, finally i decided to buy the covers keeping in mind the convenience and less mess to install them over coloring the actual calipers. The product came in 2 days and i selected red color as i have a black TM3 so i wanted o go with red and black theme. I packaging was excellent and each caliper came in wrapped cloth covers along with a printed instructions and a box with clips, tolls and screws to put the cover in place. I was able to install the caliper cover under an hour and they look good also the kit comes with 2 set of decal stickers with white and black in color so you can choose. Please keep in mind the decal are in 2 sizes as the front cover are bigger than the rear cover and the decal sizes are different due to that. I recommend getting these cover.

Very good

This is by far my favourite mode about my Tesla! Makes it stand out and the quality is so good and very easy to install, the fit well on My Tesla model 3 long range dual motor! And I had the 19” rims!

I loved the look…was my the intention of removing them before the winter and reinstalling them for the summer… came time to remove them for the winter, front calipers where they screw screws onto the caliper they broke so I cannot reinstall them…very disappointed paid 250$ very expensive for just 3 months. I guess once installed you can’t removed them!!! What would you do when you have to have brake maintenance??? Unless my set was already damaged or defective…none the less the are useless to me now…very disappointed

Love these callipers , however, my rear 18 inch wheel right hand side is damaged and paint is flaking and discoloured.Can I prefer only this piece. Thanks in advance

Pros: Firstly, I have to say that this cover is absolutely the nicest cover out there... I’ve looked at many and the details are by far unbeatable! With a hydraulic look alike tubing and rubber nipple as well as actual rivits and bolts and overall finish...absolutely wow... and the size really adds to making the original car galipers look huge! Cons: I was sooo disappointed once I tried fitting them onto my car... none of the brackets work, you have to start bending and twisting them in order to get them on and once you do a bit of modification, you can get them to fit, but the problem lies that I can’t feel this product is safe as when I tried jerking them a bit to mimic holes and bumps in the road, they immediately came loose. To me this is a safety issue and don’t want anything around my brakes coming loose at any time!!! Again fit and finish of product is 100% , quality control and safety of installation and fittment is 0%. I read 1 review that said they fit right on perfect...you better buy the lottery as you got lucky...I don’t usually bash products, but I feel this one is a safety hazard! Must quickly mention that the installation instructions are horrible, May as well not include any... but it’s quite easy to figure out installation on your own as it’s only 2 brackets... so can’t go wrong. That being said, should the manufacturer fix this quality and Installation problem and produce brackets that fit accurately and safely please contact me & advise me as I would definitely repurchase this product as I repeat... is the only great looking galiper cover out there so far! Thanks for reading !