TAVR Universal Table Top TV Stand Mount, TV Legs for Most 20-75 Inch TVs, Replacement TV Feet with Great Load-Bearing Holds up to 110 lbs, TV Stands Base with Cable Management, Max VESA 800x600 mm

This product worked well enough for my new 32 inch tv situation but would be better described as "center based TV feet" and should completely avoid using the word "stand". These are just feet on rails that screw into the mounting holes in the back of your TV. Also it is important to know that the feet 13-3/4 inches long and about 8-1/4 inches at the widest point. So MINIMALLY, you need a table/stand/furniture top that is 14 inches (front-to-back) x 9 inches wide (left-to-right), or if the surface is round you will need a 14 inch round top table/stand. I would suggest FYI, my old little rolling tv furniture stand is 14-1/2 inches x 23-1/2 inches and is holding the tv + these feet well with as small of an furniture footprint as possible for holding up a 32 inch TV. To summarize the above dimension mumbo jumbo, the feet quite long in length for a 32 inch TV. This is ok in general, because the product is made and claims to support up to a 55 inch TV (personally I would attempt these feet for such a big tv but haven't tried so have no real world input on how they work with anything larger than 32 inch). Assembly of the legs was pretty easy and they provide the tools needed. Leg assembly took like 5-10 minutes of easy slow paced work. The directions were easy enough to follow... for people who are able to follow directions. If you don't do well with directions then a youtube video will show you how easy it is. Fastening to the TV was also easy for my 32 inch TV with a flat back. In short, screw went through washer then through rail and into the TV screw hole. Tighten it down, done! Again the directions cover a number of different types of TV's and their backsides (flat, curved, etc.). If you can follow directions you simply follow the directions that match your TV's backside shape and if needed any extra fastening components they provide (plastic rings, plastic spacer things, etc.). If you have trouble with directions... best I can say is you will spend more time trying to find a video for this product that matches your TV backing than just looking at the directions and figuring it out. You can probably get by just looking at the pictures that match your situation without having to read too many words lol. Also I did not use the screws provided in the box with this product. My TV had screws in the back that I just reused. Why? Well the screws in the TV are guaranteed to fit without being so long that they stab through into the screen or electronics. Simple as that. It's a 32 inch TV so even if only half the screw made it through these leg rails and into the TV holes that would be plenty to be securely fastened. I DID followed the directions for everything else and used the silver rectangular "washer" type piece that was provided. This piece acts as a fancy rectangular washer that ensures the head of the screw will not go through the hole in the leg rail. So when used, everything is tight and secure the screw is screwed all the way into the back of the TV. Pretty standard behavior of screws and washers and fastening things together, but it's just an odd rectangular washer with 3 different size holes so it will work for all kinds of TV screw sizes. So why did I even need these TV legs to begin with? I bought a 32 inch Insignia F20 Smart Fire TV to replace an old 32 inch TV that went out. The feet on my new 32 inch TV were on the left and right corners of the TV which were a hair too wide to reliably sit on my old 14-1/2 inch x 23-1/2 inch piece of furniture (an old rolling tv stand). The TV that died had a base/legs that were in the center of the TV so this was never a problem. The new TV, nope the feet were just a little too wide. These TAVR feet on rails did the trick for my 32 inch TV. Nothing fancy. Sturdy enough for a 32 inch TV. They are getting the job done but are not something I would call heavy duty or hardcore. So for a much bigger or more important TV I would go a different route. For a 32 inch tv or something that just needs to get the job done, then for less than the $20 I spent, I would use these every time :)

Really good TV stand. It was easy to set up and feels strong and stable. I like that you can adjust the height, and it looks clean on my table. Definitely worth it.

This stand does exactly what it’s supposed to do and holds my TV securely without any issues. Setup was pretty straightforward, and I like the height adjustment and cable management, it keeps everything looking clean and organized. It’s a solid replacement if you don’t want to wall mount. That said, the build quality feels a little… questionable. It’s not bad, just not as sturdy or premium-feeling as I expected. Once it’s set up, it does the job fine, but during assembly you can tell it’s not the highest-end materials. Overall, it works great and I have no complaints about functionality, just wish it felt a bit more solid for long-term confidence.

You do need your own screwdrivers to assemble but other than that it was easy to set up and looks great. Came with extra hardware and is sturdy. Also should be very easy to clean since it’s metal.

I'm so glad that I chose this for my replacement. The TV now stands nice and tall and I'm looking up as if it's mounted. It was easy to assemble and is nice and sturdy.

These are the most basic of mounting stands: two brackets with feet attached. So their stability is dependent on how wide your VESA mount is. I would only recommend these for mounts that are 300mm or more for up to 42-inch and 400mm or wider for 50-inch TVs. Front to back, the TV is stable, but the legs twist so it can still be wobbly. It says it can handle TVs up to 80 lbs, but I would not trust it to that much weight. The TV I bought them for is a 50-inch TFT-LCD weighing 50 lbs. Front-to-back it is stable, but the narrow 200mm VESA mount it has places the feet too close together to be stable side-to-side. It stands, but that's it. Would not trust it around kids. In short, if your VESA mount is 300mm or more, give them a shot. Less than that, look elsewhere.

This stand worked out good for us after trying several others that did not. I put it on myself - it wasn't very hard. You do have to align the two poles so they match when you screw them down. Otherwise your tv tilts. It's been on ever since and we have never had a problem with it.

Me gustó y fácil de instalar. Lo coloque para un pantalla de 32" se ve de buena calidad y muy resistente

Bought this awhile ago. Not sure how well it might hold up. Seemed slightly overwhelmed by the monitor we had.. - Fast forward, 12+ months later. Still holding up well. Easy to assemble.

Bom produto

عمليه

It’s an average product for a 32 inches LED