Question 1

Does it go low on same level as regular chairs or it's higher even at lowest adjust?

Accepted Answer

You can adjust it from a regular chair height to a bar stool height. Not sure of the range in inches but works for either a regular desk or a standing desk.

Question 2

Is this seat made out of faux leather?

Accepted Answer

No its made with Nylon and foam for the seat and just the nylon mesh for the backing. Rest is plastic.

Question 3

How do I order with assemby?

Accepted Answer

Don't know. I advise assembling yourself. It's not hard just takes some energy but there are very few steps.

Question 4

What is the height from the floor to the top of the seat?

Accepted Answer

Bought this chair about 18months ago. Sit in it daily, sometimes many hours which has never been my 1st choice for an occupation. But I digress, tonite the chair measures about 30-31" above floor. I did write a nice review after I had it for awhile. I know have a modified opinion of this chair which I'll add, if possible to my original review. So incase I can't update I'll add it here:

Update on 10/16/'22
The chair has been used extensively since it arrived at the apartment. I do have a double long, lifted desk and this chair works well with the desk. It remains solid, no weakness that I can feel, see, of hear.  I don't use the fold-down arms at all any more. Thought I would but haven't since the 1st month. The roller wheels work well on medium height carpet. The cylinder that lifts the chair began to weaken around the 1st year or so. Didn't want to replace it, kinda costly, but actually I keep it at one height. So I rummaged around the garage, found a piece of 1" wide Corner molding which I cut to about 9" long then zip tied it to the Piston Rod and...Voila!!! no more sinking. EZ to do... and now for the major Surgery:

I have long legs, since I was a Teen. Long from my Hips>Knee and from my Knee>Ankle. And this is important because the Chair comes with a feature built into the Backrest between the Front Black fabric which is very porous & stretchy and the Black Plastic frame that forms the Back of the seat.  I think the idea is to help me maintain good posture, but in doing that, it pushed me too far forward on the seat cushion. Consequently,

I only had support under about 50% of my Thighs... not comfortable and too, it restricted Blood flow in my lower limbs...not good!! What to do? I examined & pondered for a couple of weeks. Then I made a decision and carried out the Surgery.

Now I'm a "MacGyver" kinda guy and I do generate unusual "solutions" which invariably work. With careful examination I determined where that Black plastic inner Backrest framework could be cut away from the Seat Frame and removed without damaging the Chair... or so I hoped. For a cutting tool, I decided against Scissors or razor knife. I decided to use a pair of wirecutters about 8" long with long Handles and a typical smooth nose that is essentially a pair of pliers with 2 cutting edges. The RESULT:  "worked like a charm!"

Now I regained about 2+ inches of seat and I can sit with my Butt up against the Backrest and my feet on the Ring at the bottom. It has turned out to be a good chair and I'm pleased with both my choice and my ingenuity. You may not to do any of that...Lucky you!

If/When I ever replace this chair, I will look for the same features & quality with 2 changes: 
1st/ I'd look for a less complicated Backrest that allowed me to sit on the "FULL" seat cushion measurement length without needing the MacGyver Solution, and, 
2nd/ I would only buy a Chair that had a Tilt-Back seat which I thought I didn't need but actually I often wish I had that feature.  So, finally, this is a well made quality adjustable Chair and I can recommend it.

ASIN	B0GKGRYCDJ
Additional Features	Adjustable Height, Back Support, Ergonomic
Age Range Description	Adult
Back Style	Mesh Back
Best Sellers Rank	#243,066 in Office Products ( See Top 100 in Office Products ) #201 in Office Drafting Chairs
Brand	Giantex
Brand Name	Giantex
Chair Backrest Width	19.5 Inches
Color	Blue
Customer Reviews	4.3 out of 5 stars 250 Reviews
Fill Material	Sponge
Form Factor	Executive
Frame Material Type	Metal
Included Components	1 x Home Office Drafting Chair, 1 x User Guide
Indoor Outdoor Usage	Indoor
Item Depth	27 inches
Item Dimensions	27 x 27 x 50.5 inches
Item Dimensions D x W x H	27"D x 27"W x 50.5"H
Item Weight	28.5 Pounds
Leg Style	wheels
Manufacturer	Giantex
Manufacturer Part Number	GX-65397PI-WH
Material	Mesh Fabric , Metal, Plastic, Sponge
Material Type	Mesh Fabric, Metal, Plastic, Sponge
Maximum Weight Recommendation	300 Pounds
Model Name	Home Office Drafting Chair
Model Number	GX-65397PI-WH
Pattern	Solid
Product Dimensions	27"D x 27"W x 50.5"H
Required Assembly	Yes
Seat Back Interior Height	22 Inches
Seat Depth	20 inches
Seat Material	Sponge
Shape	S-Shape
Size	27 inches x 27 inches x 50.5 inches
Style Name	Modern
Unit Count	1.0 Count

Drafting Chair High Back Office Chairs with Footrest Ring Flip-Up Armrest Height Adjustable Executive Desk Chair Ergonomic Mesh Computer Task Chair Lumbar Support Tall Office Chair (1, Black)

Details

Details

Description

Specifications

Reviews

Common Questions