AR Blue Clean 1350 PSI Electric Pressure Washer

I did much research before selecting this unit--- for the type of motor and pump. (This is the third pressure washer I have owned--- the first two were cheap, and I think our “hard water” did them in. The type of pump on this unit is purported to be immune to hard water effects.) The first unit I received came in an undamaged box but the blue case was damaged on the motor fan end--- some pieces of it were in the bottom of the box. This was a concern to me and I returned the item to Amazon for replacement. The replacement unit arrived, also in an undamaged box, but its blue case was also damaged--- tho not as bad. It was cracked on the bottom and skewed so that the case folds did not meet/connect. I loosened the mounting screws and was able to restore alignment. I decided that I could live with the crack. But it also was leaking oil from the gauge. And the pressure wand casing was cracked and a piece of it was broken off. I decided to try my luck with the manufacturer instead of sending the unit back for ANOTHER replacement. The manufacturer's customer service was the BEST. Prompt, courteous, responsive. New case, new gauge, new pressure wand. It's a bad time of year to pressure-wash---January in Delaware. But an unexpected warm spate of weather allowed me to test the machine, and I did it all day long. I could not be more pleased. Powerful for an electric, it cleaned my house and porch/deck easily. I played with the regulator and the pressure can drop down to a level that I will be safe to use on anything, including my soft-top Jeep Wrangler. And unlike any pressure-washer I have ever used or heard, it's QUIET. Ah, quiet. Conclusion: This is a great machine. But unless they fix what's going on between factory and customer site, it might arrive in a perfect box but be inexplicably damaged in some way. Happily, the manufacturer is ready to make it right, if you don't mind the hassle. For me, it was well worth it. Hope this is useful.

It is a great little unit. It does not deliver 1350 PSI with even the smallest tip (I do not know why manufacturers do not tell the truth) It arrived with the plastic around the powercord broken off. It doesn't affect how it works

I really wantednto like this pressure washer... I heard good things about it and it is really quiet but when I went to turn on the unit I noticed water in the gauge and also noticed it wasn't reading at all cause of the water. I still works and is very quiet but might have to return cause of the gauge.

The AR610 is a 1200 PSI @ 1.9 GPM power washer. The rating is incorrect on Amazon. My initial experiences have been very poor with this power washer. My old 1300 PSI washer failed so I decided to purchase this "Prosumer" washer based on the promise of a long life and more cleaning power (based on the 1800 PSI advertised). When the package arrived it was in very poor condition. Amazon packed the AR610 carton inside an Amazon box using a minimal amount of heavy brown paper to restrain the 35 lb washer. After removing it from the damaged box I noticed the AR carton said it was a 1350 PSI @ 1.9 GPM washer. The data plate on the washer states it is a 1200 PSI @ 1.9 GPM washer. The manual is poor considering the cost of the unit. Important information such as how often to change the oil is missing along with numerous misspellings and poor diagrams. After some frustrating efforts to contact the manufacturer, I was able to confirm it is only 1200 PSI and now have the oil change information. After using the washer for awhile I can report the following. The washer is built like a tank; it is surprisingly heavy for its size and appears to be very well made. It is very quiet in operation. The motor runs at all times even when not spraying. The wand is comfortable and the spray pattern adjustment works quite well. The pressure can be regulated down from 1200 PSI. For me this washer is not a good value. It has less cleaning power than my old unit and it takes longer to get the job done. I have to set the spray pattern very narrow to get reasonable results while cleaning typical homeowner items like the deck, lawn furniture, north side of the house, and a small camper. For my purposes this was a bad purchase. It has less power, it takes more time and it's very expensive. It will have to last a very long time before it becomes a reasonable value. If it was 1800 PSI as advertised or if I was using it professionally it might have been worth it. Evaluate your requirements very carefully before purchasing this washer.

I looked at almost every electric pressure washer from $200 up to $700 and this is where I landed. After a few months of use I am very happy with my purchase. For car detailing this is an ideal unit. Just enough pressure to wash effectively without damaging the paint and enough GPM to get good foam. I tested the AR613 before this as well and while I really liked it. In practical use I didn't notice the extra GPM, the foam was no thicker. And although the 613 has TSS, where it stops and starts, it was not only noticeably louder than the 610 but the ramp up time each time you pull the trigger gets a little annoying. The AR610 is eerily quiet. It's by far the quietest electric pressure washer I tested and quiet enough that I can run it at 8am or 8pm and not be concerned about bothering my neighbors. Just for fun, I did swap out the GFCI plug on it to a heavy duty 3 prong plug and sometimes use a remote controlled 15a electrical outlet just to save myself from having to turn the unit off manually. At first I thought I would find this annoying since my previous pressure washers all had TSS. I actually PREFER this setup with the AR610 because I have instant pressure when I pull the trigger and because it's just so darn quiet. But for $20 (plug + outlet) it was still worth it. I was heavily comparing this to the SunJoe PRO models which also have similar specs and an induction motor. The extra cost of the AR was well worth it for me because unlike the SunJoe's axial pump the AR610 has a bulletproof triplex pump. Overall the build and quality of the 610 is amazing and I really enjoy how quiet and compact it is. In a garage with lots of tools the compactness was a nice surprise. My second favorite that I tested was the AR2200 MAXX but I really didnt need or care for the cart and the GPMs were just a little too low. For about $100 less than the 610 it's a great unit and also very quiet. It is considerably larger than the 610 as well.

Nice machine. I use it for my mobile detailing business. It does struggle to turn on but I believe it's because I'm using it gravity fed from a tank. As long as it has a strong circuit to plug into it does fine. Sometimes I have to use my generator to start it because the customers power isn't strong enough. Once it's on, it has no problem drawing from the tank.

I chose this power washer because I needed relatively low 1000 psi water pressure to clean my brick house. More than 1000 psi of the pressure can damage old bricks and mortar joints. This washer is perfect for the job. It has a regulator and required water pressure can be easily set up. Similar to previous reviewer experience, the first washer arrived badly packaged and beaten up. The washer box was placed in a larger cardboard box without any cushion material like paper, beans, etc. As a result the blue plastic case was completely broken. This washer went back to Amazon. They send a replacement. It was also badly packaged, but fortunately not broken. I used the washer to clean my house and backyard shed with vinyl sidings. It worked as expected. Washer pros: Compact, quiet, solidly build. My neighbors have gas power washers which are very noisy; this power washer noise is quite low and tolerable. Cons: It is relatively heavy, the instructions are very brief. It is not clear what type of oil the washer needs and how often the oil needs to be changed (it came charged with oil). It is not clear how to use detergent. There is a build-in detergent tank and also a plastic detergent line. Although it is not written in the manual, the line needs to be inserted in the tank for the detergent to be sucked. At present I am satisfied with the washer.

After burnout two small units in three months, we tried this. And glad we did. We use it for hours everyday to clean our cultivation facility. Not only is it very powerful, it’s very quiet and super reliable. Highly recommend.

Performs as expected. While expensive, I've tossed two piece of crap washers out in the last 6 years so hopefully this is the end for a long time. The little onboard soap reservoir is so small, I really don't know the point of it. Just dip the hose into your jugs mixture. The base is a little unstable.

This unit is rated at 1350 psi. That said it works fine on my house and cars so far. Build quality is great. After replacing consumer models seemingly every year, this one looks like it will last a while. Extremely thrilled with the purchase.

Was in the market for a proper industrial grade pressure washer that could do around 1.8-2.1gpm @1000psi or so, and still use a regular outlet. The AR610 fit the bill given its actual rated spec of 1.9GPM @ 1350psi and seemed relatively compact. The machine itself arrived and the outer blue plastic casing looked cheaper/flimsier than expected but the unit itself was quite solid and heavy. Water output is nice and the pressure is enough for my needs. Compared to my older 1750psi pressure washer the difference wasn't as great as I expected so that was a nice bonus. The unit is quiet enough to be kept on continuously without becoming irritating and the long power cord is a welcome plus. Unfortunately while the main unit itself is solid, the same cannot be said for the accessories. The primary gun failed and the machine hadn't even seen more than an hours worth of work over two weeks. The trigger mechanism no longer operates properly and cannot return to the off position causing the gun to be jammed in a continuous "on" position. This resulted in me having to replace the gun with a new unit from a local store as I needed the machine to continue operating throughout the day. Hopefully the rest of the unit, being the motor and the pump will perform better than the accessories that came with it, but if you're looking for a industrial grade unit, keep in mind that the associated parts included may not be up to the task. All in all this was a relatively disappointing first experience with AR products.

all plastic connector is crap