2 Jaw Bearing Puller Remover Forged Gear Removal Repair Tool for Motorcycle Car Auto Adjustable Range Carbon Steel Straight Type Black - 5 Sizes for Choice (4in-40×80mm)

This puller seems solid enough but it has several serious problems that make it unusable. The cross screws are not threaded all the way making it useless for smaller bearings. This is easy to fix by substituting shorter or fully threaded screws. The puller does not come with a hardened cup for the jack screw tip to seat in. This alone makes it unusable unless the shaft has a center "dimple" from machining (unlikely). I had to use a cup from a different puller. The jack screw does not turn smoothly. The biggest problem is that the puller arms are not parallel when they are tightened onto the bearing or gear. This is because the LH arm in the picture is tight on the top crossbar and the RH arm is loose and sloppy. See pic. I do not recommend buying this for any purpose. There are better choices.

I purchased this smaller 2 jaw puller specifically to remove the windshield wipers on my 1999 Lincoln Town Car. It easily fits into places my larger 5" 2 jaw puller is unable to. Having the right tool makes life easy and avoid damage!

I ordered this puller to change the bearings on a pump motor. The impeller end requires a puller with a 5.5" reach. This puller is advertised as 6" but is not big enough. It is a well made tool and worked well on the short end but I will have to order a larger one to finish the job. I guess the Chinese don't know how big an inch is.Or maybe Amazon sent the wrong size.

I used this small Bearing Puller on my Bosch Table Saw motor, which had a bearing failure after years of tough service. This is quite an adjustable, tough little puller and it did the job. Highly recommended.

The 8" refers to the HEIGHT of puller, its max reach is 3" dia.Seemed well built, but obviously didnt work trying to pull off a 6" dia pulley.So I had to return, if your pulling a bearing off a shaft or something like that it will be perfect.

For removing electric motor bearings you'll need to get shorter side screws. The screws that come with it are for bigger bearings probably 2-4 inches. For smaller bearing just go to Lowes or someplace that has a good screw assortment and I got 2 and 2.5 inch 2 of each.

IT TOOK SOME FIDDLING TO GET THE JAWS TO STAY TIGHT ON THE BEARING, BUT IN THE END IT WORKED AND DID THE JOB. THE BEARING IS NOT ON THERE ANYMORE. LOL

Used this to pull the old bearings in my Hayward pool pump motor. Easy job with this tool.