OTA Berretta 92 Magazine Floor Base Plate (2 Pack)

wont be able to use them without removing material tried them on beretta 92s and mag will not lock into gun

Worked on my CZ-82 magazines like they were made for them. The mag's for my CZ-82's are slightly more narrow than my Berretta magazines. These really need to be sold for Cz-82s instead of Berrettas.Edit to my previous review:I ordered 4 more of these plates and I found a small problem fittings some cz-82 magazines. I blame it on the mags not the plates. Some magazines fit tight to the magazine well some don't. For the most part all I had to do was sand the lips of the plates. One magazine after checking actually had a smaller hole for the mag release and I had to file it lightly with jeweler's files. All said and done I still recommend this for CZ-82S.

When I first tried them they would not allow the magazine to lock into the pistol, so I had to grind them down quite a bit to make them work.

I don't usually write reviews, but in this case I have to. This cheap and useless Beretta 92 floor plate will not allow magazines to work at all. When the floor plate is assembled on in-spec Beretta factory magazines, the base plate doesn't allow the magazine to fit far enough into the mag well to engage the magazine release lock on either my Beretta 92, 92 Vertec, or 96.The floor plate is obviously unfinished. There is about 1/8 inch too much material in all dimensions. The molding lines aren't even polished off. I suspect this was rejected after molding, therefore no finishing grinds or sanding took place, and these were dumped onto the salvage market, where these scoundrels decided to sell it. DO NOT MAKE THE MISTAKE OF ORDERING THIS, COMPLETE WASTE OF MONEY!

Worked and fit Great, I will definitely buy again.

The product doesn’t fit. It will slide in on the magazine but the magazine would not slide in all the way into the magazine well because this product is to thick.

This is a piece of junk. Poorly made, don't fit factory magazines on a 92s. Hard plastic, crudely made, no give, can't get it on. One broke the first try. I junked the other one.what a piece of crap.